Corona Units
Gently slide out the Corona Unit
1
Cleaning Lever (Upper) as far as it
goes.
Gently slide the Cleaning Lever back
2
into the original position.
Gently slide out the Corona Unit
3
Cleaning Lever (Lower) as far as it
goes.
Gently slide the Cleaning Lever back
4
into the original position.
Repeat steps 1 to 4 two to three times.
Document Transport Belt
1
1139O1870A
2
1139O1880A
3
1139O1890A
1139O1900A
2. Care of the Copier
Wipe the surface of the Document
Transport Belt clean with a soft cloth
dampened with mild home detergent.
Hold the Document Transport Belt at
both edges and pull it to the left to
expose a fresh surface.
Wipe the fresh surface clean with a
soft cloth dampened with mild home
detergent.
Repeat these steps until the entire
surface of the Belt is wiped clean.
139
1139O1910A
1151O1920A