Table of Contents
Advertisement
3-6
2. Placing Originals
Using the Automatic/Duplexing Document Feeder
The Automatic/Duplexing Document Feeder automatically feeds in sheet originals placed on the
Document Feed Tray one by one. After the copy cycle has been completed, it automatically ejects the
original onto the Document Exit Tray.
Some originals may not be suitable for reliable operation of the Document Feeder. Here is a guide.
Originals Suitable for the Automatic/Duplexing Document Feeder
Type of Originals: Sheets (Plain paper)
Normal mode
• 1-Sided Original (weighing 13-1/4 to 29-1/4 lbs.)
• 2-Sided Original (weighing 16 to 24 lbs.)
• Mixed Original Detection mode (weighing 16 to 24 lbs.)
Original Size: 1-Sided Original, 2-Sided Original, Mixed Original Detection Mode
11"
17", Legal L, Letter L, Letter C, Foolscap (5-1/2"
5-1/2"
8-1/2" (Except for Mixed Original Detection Mode)
2-in-1 (Dual Original Scanning) mode : Letter C
* Lightweight Original
• For a lightweight original, it is recommended to place it directly onto the Original Glass or to make
copies using the SADF Mode (Single Automatic Document Feeding Mode).
p. 3-8
Originals Not Suitable
• Typing paper, paraffin paper, and other thin paper
• Thick paper
• Originals greater than 11"
• Transparencies, translucent paper
• Wrinkled, dog-eared, curled, or torn originals
• Clipped or stapled originals
• Carbon-backed originals
* For any of these types of originals, place the original manually on the Original Glass to make a copy.
p. 3-4
17" or smaller than 5-1/2"
8-1/2") L,
8-1/2"
Advertisement
Table of Contents
