Table of Contents
Advertisement
Using the Multi Bypass Tray (Option)
NOTES
Do not insert the paper while the copier is in the warm-up cycle or a
multi-copy cycle.
The Book Copying Mode cannot be selected for manual bypass copying.
1
Place the original on the Original
Glass and make the control panel
settings.
Swing down the Multi Bypass
2
Tray and slide the Paper Guide
Plate to the size of the copy
paper.
1139O0130A
Pull out the Multi Bypass
Tray Extender if you are using
larger paper.
Load a neat stack of copy paper
3
on the Tray and insert it into the
copier until it stops.
Before inserting, fan the
paper stack well if you are
using transparencies or
1139O0140A
translucent paper.
Correct any curl if you are
using thick paper.
Using the Key Pad, enter the
4
number of copies to be made.
Press the Start Key to start the
5
copy cycle.
1139O2360A
2. Copying Procedure
NOTE
NOTES
p. 39
41
Hide quick links:
Advertisement
Table of Contents
