Call-Tech.-Rep. Indicator - Minolta EP1052 Manual

Call-Tech.-Rep. Indicator

Meter Count
Toner
Drum Dehumidify
Book
When a malfunction occurs in the copier, the Call-Tech.-Rep. Indicator lights
up and the corresponding malfunction code appears across the Zoom Ratio
Indicator and Multi-Copy Display. At this time, you cannot start a new copy
cycle.
If this happens, try to clear the Call-Tech.-Rep. Indicator by following the
instructions below. If the Call-Tech.-Rep. Indicator lights up again, call your
Technical Representative immediately.
Resetting the Call-Tech.-Rep. Indicator
NOTE
When calling your Technical Representative, give him or her the malfunction
code shown across the Zoom Ratio Indicator and Multi-Copy Display.
<Example>
50%~200%
2. Detailed Instructions for Indicator Lights
A3 @ @
A4 @ @ B4
A4 FLS.
@ @
Paper
A5 @ @ Inch
Auto
Photo
Lighter Darker
Auto/Photo
A
1142O080AA
1139O4970A
1139O4970A
1139O4960A
%
50%~200%
141% A4 @ A3
115% B4 @ A3
100% Full Size
@ @ @
81% B4 @ A4
70% A3 A4
@
100%
1158O030DA
Open the Front Door, then close
it. This will reset the

Call-Tech.-Rep. Indicator.

If the Call-Tech.-Rep.
Indicator lights up again, call
your Technical
Representative immediately.
This is the malfunction
code C0010.
71