Minolta EP1052 Manual page 6

vi
Contents
Chapter 6 Troubleshooting
1. When this Type of Copy is Produced p. 82
2. The Copier is not functioning as designed p. 86
Chapter 7 Specifications
1. Copier p. 90
2. Multi Bypass Tray p. 92
The image is too light
The image is too dark
The copy is blurry
The copy has lines
The copy has dark specks or spots
The edge of the copy is dirty
The image on the copy is not aligned properly
None of the Control Panel Indicators light up
Pressing the Start Key does not start the copy cycle
The Copier is not activated when the Power Switch is
turned ON
p. 81
p. 89