Finisher Fn-106 - Minolta Di470 Advanced Information

Getting to Know Your Copier

Finisher FN-106

The FN-106 finisher has one staple unit.
1
Hold the recessed grip at the top of
the finisher. Pull the finisher
carefully from the copier.
2
There is a green dial on the right of
the finisher. Rotate the green dial to
the left to move the staple unit to
the centre position.
3
Pull the staple unit carefully from
the holder.
4
Remove the empty staple cartridge
from the staple unit. Position a new
staple cartridge. Then carefully
remove the seal on the staple
cartridge.
Di470
Staple unit 1
2
2-53