1
"Width" and "Length"
Whenever paper dimensions are
mentioned in this manual, the first value
always refers to the width of the paper
(shown as "A" in the illustration) and the
second to the length (shown as "B").
Paper Orientation
Lengthwise (
If the width (A) of the paper is shorter
than the length (B), the paper has a
vertical or portrait orientation, indicated
by either "L" or
Crosswise (
If the width (A) of the paper is longer
than the length (B), the paper has a
horizontal or landscape orientation,
indicated by either "C" or
Display Icons
The icons shown below are displayed
when the corresponding paper is
loaded or copy is made.
G
: Overhead projector transparencies
G
: Thick paper 1
G
: Second side of a double-sided copy
G
: Second side of a double-sided copy on thick paper
1-12
)
.
)
.
Introduction
CF1501/CF2001