Basic Functions; Timer-Based Transmission - Kyocera FS-1116MFP Facsimile Operation Manual

Timer-based Transmission

[Menu]
or
6.Special Fax
[OK]
or
61.Delay Tx
[OK]
OPERATION GUIDE

4 Basic Functions

Schedules FAX transmission for later. This example shows how to set up your
facsimile to FAX documents at a specified time.
IMPORTANT: Be sure that the correct time is displayed on the message display
before sending FAXes using this method. To adjust the time, refer to Setting the
Current Date and Time (Date & Time Setting) on page 2-1.
NOTE:
The FAX memory can hold up to 20 jobs for timer-based transmission at
once. Timer-based transmission cannot be combined with the broadcast
transmission or the polling reception.
1
Place the original documents to transmit in the document processor or on the
platen.
2
Access 61.Delay Tx.
If you are unsure how to use this route map refer to Accessing Menu Items on
page xii.
3
Enter the time to start transmission using the numeric keys and press [OK].
NOTE:
Set the time on 24-hour configuration.
4
Enter the destination FAX number using the numeric keys.
NOTE:
You can use the one-touch dial, speed dial, or group dial to enter the
destination FAX number.
5
Press [Start] to start loading the document and transmit the document at the
time specified.
NOTE:
To delete a job in memory, refer to Managing Jobs in Memory on page 4-11.
4-1