Stopping Transmission
OPERATION GUIDE
6
Press [Start].
If you want continuous scanning using the
platen, change the first original document
when scanning is completed, and then
change document and press [Start] again.
Scanning of the next original starts. When
all originals are scanned, press [
numeric keys to start FAX.
NOTE:
If 30 seconds pass without operation after a confirmation screen prompting
you to continue scanning or not is displayed, transmission will automatically start.
Press [Stop/Clear] to stop transmission of
the job displayed on the message display.
Transmission can be stopped during:
•
Scanning
•
Dialing
•
Transmission
NOTE:
To cancel the timer-based transmission or waiting job (waiting for Auto
Redialing, etc.), refer to Managing Jobs in Memory on page 4-11.
] on the
Basic Operation
3-3