ZyXEL Communications NBG4615 User Manual page 175

The following table describes the labels in this screen.
Table 70 Network > NAT > Application
LABEL
Add Application Rule
Active
Service Name
Port
Server IP Address
Application Rules Summary
#
Active
Name
Port
Server IP Address
Modify
Apply
Cancel
NBG4615 User's Guide
DESCRIPTION
Select the check box to enable this rule and the requested service can be
forwarded to the host with a specified internal IP address.
Clear the checkbox to disallow forwarding of these ports to an inside server
without having to delete the entry.
Type a name (of up to 31 printable characters) to identify this rule in the first
field next to Service Name. Otherwise, select a predefined service in the second
field next to Service Name. The predefined service name and port number(s)
will display in the Service Name and Port fields.
Enter the start and end port(s) to be forwarded.
Type the inside IP address of the server that receives packets from the port(s)
specified in the Port field.
This is the number of an individual port forwarding server entry.
This icon is turned on when the rule is enabled.
This field displays a name to identify this rule.
This field displays the port number(s).
This field displays the inside IP address of the server.
Click the Edit icon to display and modify an existing rule setting in the fields
under Add Application Rule.
Click the Remove icon to delete a rule.
Click Apply to save your changes back to the NBG4615.
Click Cancel to begin configuring this screen afresh.
Chapter 20 NAT
175