Ipv6 Connection: Dhcpv6 - ZyXEL Communications NBG4615 User Manual

Chapter 16 IPv6
Table 56 Network > IPv6: Ethernet (continued)
LABEL
Address Autoconfiguration Setup
Enable Address
Autoconfiguration
Type
Router Advertisement
Lifetime
Apply
Cancel

16.2.2 IPv6 Connection: DHCPv6

If you select DHCPv6 as the IPv6 Connection Type, the following screen displays.
Figure 92 Network > IPv6: DHCPv6
146
DESCRIPTION
Select the checkbox to enable Address Autoconfiguration on the NBG4615.
Select the IPv6 autoconfiguration type: Stateless or Stateful. If you choose
Stateful, enter the beginning and end of the IPv6 address range in the fields
below. If you choose Stateless, IP addresses are not generated by a DHCP
server. They are formed by combining network prefixes with an interface
identifier, which are derived from embedded IEEE Identifiers.
See page 143 for more information.
Specify the lifetime of the router advertisement.
Router advertisement is a response to a router solicitation or a periodical
multicast advertisement from a router to advertise its presence and other
parameters, such as IPv6 prefix and DNS information.
Click Apply to save your changes back to the NBG4615.
Click Cancel to reload the previous configuration for this screen.
NBG4615 User's Guide