Table of Contents
Advertisement
38
en | Unpacking
2.5.3
Restoring Factory Default Settings
At times you may have to restore the factory default settings to the unit. To restore defaults:
1.
2.
2.6
Maintenance
The LTC 2382/90 requires no routine maintenance and is designed for long and trouble-free
use under normal operating conditions. Repair should only be attempted by qualified
personnel.
F.01U.090.110 | 3.0 | 2010.04
Press and hold the PLAY key before applying power to the video processor.
Connect the power cord (turn on power) while continuing to hold the PLAY key for 5
seconds.
Once the system resets the defaults, the monitor displays:
DEFAULTS DONE
The factory default values are as follows:
TIME/DATE
Time/Date
Not changed
Time Format
24 hours
Date Format
MM/DD/YY
Display
TOP 2
SEQ SETUP
Camera 1-4, Quad
2 seconds
ALARM SETUP
Alarm Inputs
ON
Dwell Time
2 seconds
Alarm Input Polarities Normally Open (NO)
Video Loss
ON for all video inputs
Relay
ON for all inputs
Beeper
OFF for all inputs
REC OUT MODE
Set up
OUAD ONLY
CAMERA TITLES
Display Titles
1, 2, 3, 4
Display
ON
COLOR ADJUST
Video Inputs
AUTO
Contrast
Nominal for all inputs
Brightness
Nominal for all inputs
Border Color
WHITE
SYSTEM SETTINGS
Language
ENGLISH
Password
Disabled
Text Color
WHITE
Key Lockout
OFF
Unit ID
000
User's Guide
Digital Video Quad Processor
Bosch Security Systems, Inc.
Hide quick links:
Advertisement
Table of Contents
