Using The Function Keys (Ltc 2382/90) - Bosch LTC 2380 User Manual

Digital Video Quad Processor
2.4.2

Using the Function Keys (LTC 2382/90)

Programming the LTC 2382/90 includes setting titles for the video inputs, assigning dwell
times for each video input and quad display for sequencing (SEQ) operation, enabling or
disabling the alarms, and video loss alarm and enabling or disabling the security lock. Each of
these functions are pre-programmed with a factory default setting.
If there is no key activity while in Menu mode for one minute the unit automatically exits the
menu mode.
To access the MAIN menu:
1.
The PLAY and SEQ/ALM keys are not used in programming. See Table 2.1 above for
descriptions of the function keys.
NOTICE! The Video Quad illuminates the appropriate LEDs, located on the front panel, for
i
active keys.
Configuring the Time and Date
Set the time and date format, the current time/date and the displayed position on the monitor
from the TIME/DATE menu.
1.
2.
Bosch Security Systems, Inc.
Press the MENU key to display the MAIN menu screen. The unit displays the following
screen:
MAIN MENU VER X.X
(1) TIME/DATE
(2) SEQ SETUP
(3) ALARM SETUP
(4) REC OUT MODE
(5) CAMERA TITLES
(6) COLOR ADJUST
(7) SYSTEM SETTINGS
> (8) EXIT MENU
Access the MAIN menu.
Press the Up and Down arrow keys and select TIME/DATE; then press the Return key. The
unit displays the following menu:
TIME/DATE
(1) TIME FORMAT
(2) DATE FORMAT
(3) TIME/DATE SET
(4) DISPLAY: TOP 1
> (5) RETURN
User's Guide
Unpacking | en 19
F.01U.090.110 | 3.0 | 2010.04