Bosch LTC 2380 User Manual page 39

Digital Video Quad Processor
RS-232 Front Panel Key Emulation
The RS-232 connection uses commands to emulate all Front Panel key functions. The table
below summarizes these commands:
Front Panel Emulation Commands
Key
PLAY
MENU
SEQ/ALM
1/
2/
3/<
4/>
Return
Table 2.3 RS-232 Key Emulation Commands
You must terminate each command with either the standard 13 decimal return character or
the standard 0D hex return character.
Parameter Set/Read Commands
The RS-232 Parameter Set/Read commands allow you to set various parameters in the video
processor (time and date, for example) and allows the computer to read the video
processor's Alarm/Video status.
The table below summarizes these commands:
Parameter Set/Read Commands
Parameter to Set
Time
Date
Display Unit ID
Unit Address
Parameter to Read
Alarm Video Status
Table 2.4 RS-232 Parameter Set/Read Commands
You must terminate each command with either the standard 13 decimal return character or
the standard 0D hex return character.
Setting the Time and Date over RS-232
Issue the following commands to set the time and date for the video processor:
Set the Time: !TIME hh mm ss [return char]
Set the Date: !DATE mm dd yy [return char]
Bosch Security Systems, Inc.
RS-232 Command
/VR
/ME
S/SR
/1U
/2D
/3L
/4R
/QE
RS-232 Code
!TIME
!DATE
!UI
!ID
RS-232 Code
!S
User's Guide
Unpacking | en 35
F.01U.090.110 | 3.0 | 2010.04