Bosch LTC 2380 User Manual page 36

32 en | Unpacking
To view images recorded in the QUAD ONLY mode:
1.
2.
NOTICE! If there is no video signal on the PLAY input the video processor displays the
following message:
NO PLAY IN VIDEO
i
Check to make sure that the VCR/DVR is plugged in and turned on and that the video
processor is in the Playback mode.
If PLAY is pressed on the Video Quad before the recording device is in playback mode, the unit
displays unexpected images. To correct this display, press the play button on the recording
device.
3.
NOTICE! Playback in the Full-screen mode is actually a 4X zoom of the appropriate quadrant.
i
This zoom causes some pixilation of the image to occur.
To view images recorded in the SAME AS MONITOR mode:
1.
2.
NOTICE! If there is no video signal on the PLAY input the video processor displays the
following message:
NO PLAY IN VIDEO
i
Check to make sure that the VCR/DVR is plugged in and turned on and that the video
processor is in the Playback mode.
If PLAY is pressed on the Video Quad before the recording device is in playback mode, the unit
displays unexpected images. To correct this display, press the play button on the recording
device.
F.01U.090.110 | 3.0 | 2010.04
Insert a recorded tape into the VCR or select a playback time from the DVR and start the
playback on the recording device.
Press the PLAY key on the LTC 2382/90 unit to display the playback video from the VCR/
DVR.
The LED on the PLAY key remains illuminated as long as this function is selected.
Use the following keys to view an individual VCR/DVR image in Full-screen mode or to
view all images in the Quad mode:
a. Press the 1 key to view the image in the upper-left hand quadrant in Full-screen
mode. Press the key again to freeze the image and press it again to unfreeze the
image.
b. Press the 2 key to view the image in the upper-right hand quad in Full-screen mode.
Press the key again to freeze the image and press it again to unfreeze the image.
c. Press the 3 key to view the image in the lower-left hand quad in Full-screen mode.
Press the key again to freeze the image and press it again to unfreeze the image.
d. Press the 4 key to view the image in the lower-right hand quad in Full-screen mode.
Press the key again to freeze the image and press it again to unfreeze the image.
e. Press the Return key to return to the Quad mode.
f. Press the PLAY key to toggle between Live and Playback modes on the monitor.
Insert a recorded tape into the VCR or select a playback time from the DVR and start the
playback on the recording device.
Press the PLAY key on the LTC 2382/90 unit to display the playback video from the VCR/
DVR.
The LED on the PLAY key remains illuminated as long as this function is selected.
User's Guide
Digital Video Quad Processor
Bosch Security Systems, Inc.