Bosch LTC 2380 User Manual page 29

Digital Video Quad Processor
Configuring the Beeper
Use the BEEPER function to alert an operator when an alarm is generated. The Beeper can be
turned ON or OFF for each alarm input.
1.
2.
3.
4.
Configuring the REC OUT Mode
The REC OUT MODE defines the format of the recorded video.
1.
2.
3.
Bosch Security Systems, Inc.
Press the Up and Down arrow keys and select BEEPER; then press the Return key. The
unit displays the following menu:
BEEPER
(1) INPUT 1: OFF
(2) INPUT 2: ON
(3) INPUT 3: ON
(4) INPUT 4: OFF
> (5) RETURN
Press the Up and Down arrow keys to move the cursor to the required input.
Press the Return key to toggle between these options:
– OFF: the unit does not activate the beeper when an alarm is present on that input.
– ON: the unit activates the beeper when an alarm is present on that input.
Press Up and Down arrow keys to select RETURN; then press the Return key to exit.
Press the Up and Down arrow keys and select the REC OUT MODE; then press the Return
key. The unit displays the following menu:
REC OUT MODE
QUAD ONLY
TO EXIT PRESS RETURN KEY
Press the Up and Down arrow keys to toggle between the following modes:
– QUAD ONLY: the unit transmits Quad mode images to the recording device.
– SAME AS MONITOR: the unit transmits only the images on the monitor to the
recording device.
Press the Return key to exit the menu.
User's Guide
Unpacking | en 25
F.01U.090.110 | 3.0 | 2010.04