Table of Contents
Advertisement
Appendix
C & D/DSS
Reference
Publications
129
(e) Run in Straight Line. The grounding conductor for an antenna mast or antenna discharge unit shall be run in as
straight a line a practicable from the mast or discharge unit to the grounding electrode.
(f) Electrode.
The grounding conductor shall be connected as follows:
(1) To the nearest accessible location on the building or structure grounding electrode system as covered in Section
250-81, (2) the grounded interior metal water piping system as covered in Section 250-80(a), (3) the power service
accessible means external to enclosures as covered in Section 250-71 (b_, (4) the metallic power service raceway, (5)
the service equipment enclosure, or (6) the grounding electrode conductor or the grounding electrode conductor
metal enclosures; or
(2) If the building or structure served has no grounding means, as described in (f)(1), to any one of the individual
electrodes described in Section 250-81; or
(3) If the building or structure served has no grounding means, as described in (0(1), or (0(2), to (1) an effectively
grounded metal structure or (2) to any of the individual electrodes described in Section 250-83.
(g) Inside or Outside Building. The grounding conductor shall be permitted to be run either inside or outside the building.
(11)Size. The grounding conductor shall not be smaller than No.10 copper or No. 8 aluminum or No. 17 copper-clad steel
or bronze.
(I) Common Ground. A single grounding conductor shall be permitted for both protective and operating purposes.
(j) Bonding of Electrodes. A bonding jumper not smaller than No. 6 copper or equivalent shall be connected between the
radio and television equipment grounding electrode and the power grounding electrode system at the building or
structure served where separate electrodes are used.
DSS Reference Publications
Publication/Description
Model #
DSS Accessories
& Antenna Components Catalog
N/A
DSS System Customer Education
Guide
N/A
DSS System Installation Training Manual
N/A
New Home "Prewiring"
& Distribution Systems
N/A
Satellite Dish Installer Guide
DSAI00RW
Satellite Dish Installer Guide
DSA400RW
Satellite Receiver User's Manual
DRD 102RW
Satellite Receiver User's Manual
DRD203RW
Publication
Number
T-8743CM
T-DSSGUIDE-1
T-DSSINSTALL-
1
T-DSSPREWIRE-1
1Q57 406-01A
1Q57 414-01A
1Q57 407-01A
1Q57 415-01A
NOTE:
To obtain the publications listed above contact:
Thomson
Consumer
Electronics
10003 Bunsen Way
Louisville,
KY 40299
Telephone:
502-491-8110
Advertisement
Table of Contents
