Table of Contents
Advertisement
94 lnstallation
/ Dish Assembly
Use the following
procedure
to install a telephone
jack:
SAFETY
NOTE:
Never work with active telephone
lines.
When the
telephone is ringing, the current carried on these lines
may shock you. While working on the telephone line,
disconnect the wiring at the point of demarcation.
If
you are unable
to do this, take all the telephone
handsets off the hook.
I. Find an accessible
telephone
junction
box (this could
even be the point of
demarcation).
Plan the installation
of the cable from that point to the receiver.
2. Remove the customer access cover on the junction box and connect the wires of the
telephone
cable to the terminals.
Remember
to follow the color code: red wires
connect to red wires and green to green.
3. Route the cable to the receiver.
Use crawl, attic, and garage spaces where ever
possible.
As you route this cable, secure it to wails and other supporting
structures
to prevent physical damage.
4. Install the modular plug or RJ11/14 type wall plate.
@
TELEPHONE
CABLE
WIRE
TERMINALS
Figure 78, Telephone Junction
Box Terminals
Advertisement
Table of Contents
