Networks & Services; Networks & Services > Network Configuration - Multitech MultiModem rCell MTCBA-H3-EN3-P1 User Manual

AT+CREG?
Notes: You can also retrieve the integrated cellular modem information without using a browser:

Make a TCP connection to port 80 (same as the Web Admin port) and send data as:
GET /atinfor.html HTTP/1.1

Then press Enter twice.
Refer to the AT Command Reference Guide for other commands.
Networks & Services
Networks & Services > Network Configuration
Networks or Hosts can be added here. The options to Delete or Edit a network after it has been defined and
added are available by using the table at the bottom of the screen.
Network Configuration
Enter the Name, IP Address, and Mask for a new Network or Host.
Notes:
A Network/Host Name:
●
Cannot be edited.
●
Cannot be deleted if it is used in another configuration.
●
Changes are reflected in all the configurations in the Web Management software where they are used.
●
If added here will display in the following sections: Static Routes, DNAT, and Packet Filters.
Name:
IP Address:
Subnet Mask:
39
Network Registration
Enter the name of the Network/Host. The same address-mask pair should not already
be present in the displayed list. The Name is limited to 15 characters maximum.
Enter the IP Address of the Network/Host. The same address-mask pair should not
already be present in the displayed list.
Enter the Network Mask of the Network/Host. For Host addresses, the mask is entered
as 32. For more information, see
Chapter 3 – Using the Web Management Software
Appendix A -- Table of Commonly Supported
Multi-Tech Systems, Inc. MultiModem rCell User Guide
Subnets.