Permobil K450 Owner´s manual
Control panel
Charging socket
This socket is used only to charge or lock the wheelchair. Do not connect any
programming cable to this socket. The socket must not be used as a power
source for any other electrical equipment. Connecting other electrical equipment
may damage the control system or lead to the wheelchair having poorer elec-
tromagnetic compatibility (EMC).
WARNING
The wheelchair's warranty ceases to apply if any equipment other than the battery charger belong-
ing to the wheelchair or the key used for locking is connected to the control panel's charging con-
tact.
Charging socket
29
Design and function
Charging contact
The charging con-
tact's "guide boss"
must face
upwards when it
is to be connect-
ed.