Advertisement
WaterWorks
...... AUTOMATIC WATER CONDITIONER
SPECIFICATIONS
/ DIMENSIONS
MODEL WS 1000
See Rating Decal, Located On The Softener
4O / ,77
8x40
See Rating
Decal
7O
5
20 - 125
120
3
RATED CAPACITY
AMOUNT OF HIGH CAPACITYRESIN (Ibs ! cuft)
RESIN TANK NOMINAL SIZE (in., dia x height)
SERVICEFLOW RATE (gpm)
WATERSUPPLYMAXIMUM HARDNESS (gpg)®
WATERSUPPLYMAX. CLEAR WATERIRON (ppm)®
WATERPRESSURELIMITS (rain. / max. psi)
WATERTEMPERATUREMAXIMUM (°F)
WATERSUPPLYMINIMUM FLOW RATE (gpm)
REGENERATION CYCLE FLOW RATES (gpm)
FILL (flow to brine tank)
BRINING
1
BRINE
RINSE}._-- (flow to
BACKWASH I
drain)
FAST RINSE "J
,3
.15
.10
1.8
1,8
® Determined
by water analysis from a qualified water testing
laboratory.
48-3/4"
41-1/4"
- 3-3/8"
INLET_- _OU_T_L.
<---- 18-1/4"---_
FACTS AND FIGURES TO KEEP
Fill in the blanks below and keep this book in a safe
place so you always have these facts.
Water Softener Model No.I-
Serial Number
Date Installed
Water Hardness
Grains Per Gallon
Iron Content
Parts Per Million
*pH
Taste And/Or Odor
1 The model number is on the rating decal, located on
the back of the softener top covers.
4
Advertisement
