Advertisement
Step-by-step fitting instructions for the
Eco-Fresh Drinking Water Filter
Parts
1
Speedfit valve
Mounting bracket,
Cartridge head,
Screws
Cartridge
Hose (cut to length as necessary)
Tap with 3/8" coupling
EcoWater Systems
T: 01494 484 000
E: info@ecowater.co.uk
www.ecowater.co.uk
Advertisement
Table of Contents
Related Manuals for EcoWater Eco-Fresh
Summary of Contents for EcoWater Eco-Fresh
- Page 1 Step-by-step fitting instructions for the Eco-Fresh Drinking Water Filter Parts Speedfit valve Mounting bracket, Cartridge head, Screws Cartridge Hose (cut to length as necessary) Tap with 3/8” coupling EcoWater Systems T: 01494 484 000 E: info@ecowater.co.uk www.ecowater.co.uk...
- Page 2 Important note: Tube end must be cut square 9. Screw the Eco-Fresh filter cartridge into the filter head 10. Turn on the water supply at the self-piercing saddle valve 11. Before use, flush at least 20 litres of water through the system...
- Page 3 Finally connect tubing with a 3/8” pushfit fitting on the tail of the tap. Tap Body Lower body small or large Worktop or sink Black plastic stiffener Spring washer EcoWater Systems T: 01494 484 000 E: info@ecowater.co.uk www.ecowater.co.uk...
- Page 4 Instructions for installation of self-piercing valve EcoWater Systems T: 01494 484 000 E: info@ecowater.co.uk www.ecowater.co.uk...
Need help?
Do you have a question about the Eco-Fresh and is the answer not in the manual?
Questions and answers