BLADEZ Discover Owner's Manual page 18

8. After 30 seconds following the End of a program, it will also go back to the Start/Ready position.
9. The time pre-set value is 0, range is 20~99. At the flashing display of 20 minutes, press
UP/DOWN speed keys to set desired time
V. Program Mode
P1 Manual Program ：
P1 is also a Manual except that the time must be set or defaulted to 10 minutes. Incline is available
during the workout.
LEVEL
P2 9 Hole
P3 Hill Climb LEVEL
time：Pre-set value 30min；Range 20~99min
LEVEL
P4 Hill Run
time：Pre-set value 30min；Range 20~99min
LEVEL
P5 Interval
time：Pre-set value 30min；Range 20~99min
LEVEL
P6 Rolling
time：Pre-set value 30min；Range 20~99min
LEVEL
P7 Weight loss
time：Pre-set value 30min；Range 20~99min
time：Pre-set value 30min；Range 20~99min
P8 Custom
PROGRAM has 30 segments: (SE01~SE30) and all the pre-set values are the lowest values.
Setting: time, program executed value (setting time is executed in 30 segments)
（ ）
1 After pressing Mode button, the LEVEL light is on, window flashes. This function is to
select elevation ( L1~L10) . You can press
confirm or accept change.
（ ）
2 After selecting level, TIME window will start to flash. At this time press,
exercise time or press START key directly to start right away without entering parameters
range of time value :20~99 min, pre-set 30min, step 1 min.
TREADMILL OPERATIONS
；
Pre-set value 0min Range 20 ~ 99 min step 1 min, no Level (incline)
Initial V alue1 Range ，
：
，
： Initial V alue1 Range
Initial V alue1 Range ，
：
Initial V alue1 Range ，
：
，
： Initial V alue1 Range
，
： Initial V alue1 Range
1~10 step1 3500 meter is the course length.
， ，
1~10， step 1
step 1 min
，
1~10， step 1
， step 1 min
1~10， step 1
step 1 min
，
1~10， step 1
step 1 min
，
1~10， step 1
step 1 min
，
step 1 min
，
arrows to change and press ENTER to
16
to set the