Storage - BLADEZ Discover Owner's Manual

Caution: You must be able to safely lift 20 kg (45lbs) in order to raise\lower and move the treadmill.
Do not attempt to move the treadmill over uneven surface.
Never place the unit on its side. Doing so will render the
safety release mechanism inoperable and may cause injury.
FOLDING YOUR UNIT.
IMPORTANT:
minimum and unplug the cable from the mains socket. This treadmill is equipped with a
a safety lock/release mechanism for folding purposes. Lift the deck of the machine at the
end caps up until you hear it lock ('click') into position. Tilt the machine to rest on the wheels
(located at the bottom of the machine) and push to move. Refer to Fig.9 & 10:
UNFOLDING YOUR UNIT.
If you wish to use the treadmill, do the reverse procedure. Use your hand to pull the knob
outward (fig. 9) in the direction of the arrow and push the deck toward the floor to initiate the
drop. The deck should slowly lower to the floor. When folding or unfolding the treadmill make
sure that there are no children about or obstacles that might hinder the folding motion Fig.9.
MOVEMENT & STORAGE.
The unit is equipped with wheels to make it easier to move. Make sure that the mains cable
is unplugged from the wall socket.
If you wish to move the treadmill, first - fold it up, place your hands on the handrails and tilt
the treadmill,
To prevent accidents DO NOT move the treadmill across uneven floors or place the unit
on its side.
Note:
The Pneumatic Cylinder contains high pressurized gas. Avoid crashing with other objects to prevent
damage. If the Cylinder is hit, it might be damaged and cause the treadmill to fall while folding.

STORAGE

Before attempting to fold the unit, stop the belt, lower the elevation setting to
so that the wheels rest on the floor. T
Fig.9
hen push or pull to move.
Fig.10
12