Download Print this page

Whirlpool SF216LXSQ2 Installation Instructions Manual page 13

30" (76.2 cm) freestanding gas range
Hide thumbs Also See for SF216LXSQ2:

Advertisement

Available languages

Available languages

3. Turn the cap over so that N or NAT is visible.
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti=tip bracket to rear range foot.
Reconnect
the anti=tip bracket,
if the range is moved.
Failure to follow these instructions can result in death
or serious
burns to children
and adults.
A. Cap
4. Reinstall the cap.
To Convert
Surface
Burners
1. Remove burner grate, burner caps and burners.
1,
2.
Turn manual shutoff valve to the "closed" position.
Unplug range or disconnect power.
...................
S
A
...................................
O
A. Torange
B. Manual shutoff valve "closed" position
C. Gas
supply
fine
To Convert Gas Pressure Regulator
1. Open broiler door and remove broiler pan. The gas pressure
regulator is located in the back right hand corner of the broiler
compartment.
A. Gas pressure regulator
IMPORTANT: Do not remove the gas pressure regulator.
NOTE: Do not remove the spring beneath the cap.
2. Remove the cap from the gas pressure regulator using a
flat-blade screwdriver.
A
2,
3,
4.
C
A. Burner cap
B. Burner
C. Center burner
Locate the Natural gas orifice spuds for top burners in the bag
containing literature included with the range. Three Natural
gas spuds are stamped "125," one is stamped "132" and one
"128."
Remove the LP gas orifice spuds using a 7 mm combination
wrench.
Install the Natural gas orifice spuds using a 7 mm combination
wrench.
o
\
A
A. Spud
B. Holder
B
A. Cap
13

Advertisement

loading

This manual is also suitable for:

Sf216lxsm2