ENCAD NovaJet 4 User Manual page 64

User's Guide
When the Frame Length option is set to Auto (the default), the printer
assigns the length of the print area based on the width of the media and
the Margin option selected (Normal or Expand). For example, your
Frame Length is set to Auto and your Margins are set to Normal. Load
media which is 36" wide, and your Print Area will be set to 34.8" wide x
46.0" long.
The Frame Length option adjusts the length in 0.1" or 1.0 mm incre-
ments to a maximum of A0 or E size paper. The value shown on the
display will scroll slowly for the first second, then faster, until you
release the button.
Note that this setting changes only the length of the print area. To
increase the width, you must use wider media. See "Selecting the media
standard" in this chapter to determine the print area width for different
media sizes.
When printing images that are longer than the standard sheet sizes; i.e.,
long prints, you must use roll media and set the Frame Length option to
Auto, Roll option to On, and the Control option to Software.
When setting a custom print length, remember to allow room for the
margin (the margin lies outside the print area). See "Print area margins"
in this chapter for information about margin sizes.
To change the length of the print area
1 From the Main menu, press the arrow keys to advance to the Page Format
menu, then press Select.
2 Press the arrow buttons to advance to Frame Length, then press Select two
times. The equals sign (=) blinks.
4-64 Positioning an image
MAIN MENU
PAGE FORMAT
PAGE FORMAT
FRAME LENGTH