Setting A Dry Time - ENCAD NovaJet 4 User Manual

User's Guide
3 Press the arrow buttons to scroll through the language options. When the
language you want to use is displayed, press Select. The equals sign stops
blinking, indicating that the language is set.

Setting a dry time

Unattended prints might require drying time to prevent the ink from
smearing when the image touches the basket (or takeup roll if the power
media feed unit is installed) or previously printed images. In addition,
you may want to change drying time depending on the media you are
using and the humidity. Dry Time values range from 0 seconds to 100
minutes. When the Dry Time has expired, the printer unloads or cuts the
image and begins printing the next image in the buffer.
To set the dry time
1 From the Main menu, press the arrow key to advance to the Printer Setup
menu, then press Select.
2 Press the arrow key to advance to the Dry Time option, then press Select.
The equals sign (=) blinks.
3 Press the arrow key to increment the Dry Time values, and press Select to
choose the value you want. The equals sign (=) stops blinking.
4 Press the Menu button to move back up to the previous menu level.
3-46 Setting printer options
MAIN MENU
PRINTER SETUP
PRINTER SETUP
DRYTIME=0:00