Rear; Installation - DAPAudio IMIX-7.3 Manual

IMIX 7.3

Rear

Power adapter connector
Power on/off switch
With/without mic switch
Master 3 level switch
Master 2 level switch
Master 1 level switch
Channel 5 gain control
Channel 4 gain control
Channel 3 gain control
Channel 2 gain control
Channel 1 gain control
Mic 2 combo input connector
Mic 1 combo input connector
Channel 2 line/phono switch

Installation

Remove all packing materials from the IMIX-7.3. Check that all foam and plastic padding is removed.
Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Ordercode: D2351
Channel 1 line/phono switch
Record RCA unbalanced out connector
Master 3 XLR balanced out connector
Master 3 RCA unbalanced out connector
Master 2 XLR balanced out connector
Master 2 RCA unbalanced out connector
Master 1 XLR balanced out connector
Master 1 RCA unbalanced out connector
Channel 5 line 1/line 2 input connectors
Channel 4 line 1/line 2 input connectors
Channel 3 line 1/line 2 input connectors
Channel 2 phono-line 1/line 2 input
connectors
Channel 1 phono-line 1/line 2 input
connectors
GND screw
6