Related Manuals for DAPAudio AS-8
Summary of Contents for DAPAudio AS-8
- Page 1 MANUAL ENGLISH AS-8 Ordercode: D1904 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
AS-8 Table of contents Warning ....................................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Connection with the mains............................4 Return Procedure ................................5 Claims ....................................5 Description of the device ..............................6 Frontside..................................6 Backside ..................................7 Installation ................................... 7 Set Up and Operation ............................... -
Page 3: Warning
Save the carton and all packing materials. In the event that a device must be returned to the factory, it is important that the device is returned in the original factory box and packing. Your shipment includes: DAP Audio AS-8 IEC power cable (1,5 m) ... - Page 4 AS-8 IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the system. Never let the power cord come into contact with other cables! Handle the power cord and all connections with the mains with particular caution! ...
-
Page 5: Operating Determinations
AS-8 Operating Determinations This system is not designed for permanent operation. Consistent operation breaks will ensure that the system will serve you for a long time without defects. If this system is operated in any other way, than the one described in this manual, the product may suffer damages and the warranty becomes void. -
Page 6: Return Procedure
AS-8 Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. -
Page 7: Description Of The Device
Description of the device Features The AS-8 can be used for several purposes. Due to its intelligent design, the users can easily switch between a controllable audio mixer (with several inputs) and a signal splitter (with several controllable outputs). This makes the AS-8 a multifunctional solution for your own monitor mix, multi zone systems, conference applications and more. -
Page 8: Backside
While operating in Splitter mode, the main inputs may feed the mono outputs of all channels. Installation Remove all packing materials from the AS-8. Check that all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. -
Page 9: Set Up And Operation
AS-8 Set Up and Operation Follow the directions below, as they pertain to your preferred operation mode. Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 115V specification product on 230V power, or vice versa. -
Page 10: Mixer
AS-8 Mixer Fig. 05 01) If the mono channels are used in Mixer mode, a maximum of 8 mono input signals can be routed to the main outputs. 02) The individual signal sources are connected to the mono inputs. 03) Each channel is equipped with a Level control, which can be used for setting the amount of its signal, relative to others in main section. -
Page 11: Splitter
Splitter Fig. 06 01) The output signal from the mixer is applied to the main inputs of the AS-8. 02) If the SPLITTER/MIXER buttons are depressed (set to Splitter), then the mono outputs of the respective channels provide the left or right main signal. -
Page 12: Matching Amplifier
AS-8 Matching Amplifier Fig. 07 It is possible to use the AS-8 as a matching amplifier, in order to convert the level of a signal source into a different level. 01) The AS-8 should be operated in Mixer mode. 02) The output of the signal source is connected to the mono input. -
Page 13: Connection Cables
Follow the configuration examples below for your particular connection. Maintenance The DAP Audio AS-8 requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. -
Page 14: Replacing The Fuse
See the product specification label for details. Troubleshooting DAP Audio AS-8 This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit operates properly, do not carry out following steps. - Page 15 AS-8 Ordercode: D1904...
- Page 16 ©2016 DAP Audio...
Need help?
Do you have a question about the AS-8 and is the answer not in the manual?
Questions and answers