Table of Contents
Advertisement
Document 2131145. Rev 1.0 May.09
Removing the modem
To remove the modem:
1.
Close Watcher if it is open.
2.
If you're running Windows 2000, click the Unplug or Eject
Hardware icon
NEC PCI to USB Open Host Controller
for
Enhanced PCI to USB Host Controller
notifying you that it is safe to remove the device, click
3.
Use the ejector (located on your computer, next to the
ExpressCard/PC Card slot) to remove the modem from the
slot. Pull the modem out of the slot by gripping both sides
of the modem and pulling the modem straight out.
Correct
Attaching an external antenna
You can improve the signal strength by attaching an external
antenna with a TS9 connector (sold separately). The recom‐
mended antenna is the 6‐band blade antenna with TS9
connector, available from
6000342).
Caution: Use of other antennas may violate FCC requirements.
To attach the external antenna:
1.
If the modem is inserted in your computer, remove it.
2.
Gently flip open the tab on the side of the modem.
3.
Hold the antenna cable by the connector (end) part, and
carefully insert the connector part of the cable into the
corresponding connector on the modem.
4.
Reinsert the modem into your computer.
in the system tray, and click the entry
Standard
or
. If a dialog box appears
www.sierrawireless.com
Installation
OK
.
Incorrect
(part number
21
Advertisement
Table of Contents
