Close The Top Lid; Finish Washing - Haier XQB60-C User Manual

Procedure selection method
Times of pushing the
Selected procedure
SELECT button
WASH, RINSE, SPIN
(the washing liquid
remains in the tub)
WASH - RINSE
(the rinsing liquid
remains in the tub)
RINSE - SPIN
(spin after drain)
Push the SELECT button for 5 times, and it will resume the initial mode. It will circulate in that sequence.
4.Switch the WATER LEVEL button to select suitable water level
According to the capacity of the laundries, choose the three water levels
After the water inlet as per the preset water level, in case additional water quantity is required, please first set
the button to the Reset when the automatic inlet reaches the water level, you can turn to the needed water
level.
5.Push the START/PAUSE button
5 Close the top lid. 6 The washing is finished.
If you open the top lid, the machine will stop working before spinning.
Applicable circumstance
When the common laundries need
washing, rinsing and spinning.
WASH
Repeat using the washing liquid
When prevent the laundries from
corrugating, and the laundries do
not need spinning
When the laundries need rinsing
and spinning after manual washing
When the laundries need only
Spin
spinning after manual washing
(first drain then spin)
Using process Using process
Using process Using process
Contents (the lighted indicators
indicate the programs about to run)
WASH
WASH
WASH
WASH
WASH
High
The power will be switched off automatically after the finishing of the washing.
RINSE SPIN
RINSE SPIN
RINSE SPIN
RINSE SPIN
RINSE SPIN
Middle Low
It beeps to indicate the
finishing of washing