Table of Contents
Advertisement
Time list of each program (minute)
Water
Program
level
Standard
1~10
Jeans
1~10
Gentle
About 4
Quick
1~10
Total time: including the normal water inlet time, drain time, excluding the power off time. The
total washing time may be influenced by the water inlet pressure and water level.
Spin time: the time from intermittent running to finishing.
The Standard or Jeans program could combine the process of soak during which the washing
machine firstly soak for about 15~45 min after water filling and then begins to wash.
When "Quick wash" program is chosen, the washing machine would automatically set water
level and full processes of wash, rinse and spin.
5 Push the "RESERVAT ION" button to select
suitable reserve progra m
After switching on, the washing machine reserved wash program will be automatically set
inactive. If you desire a wash cycle to end at a reserved time, you can press the
button to set a reserved wash program. Refer to
Confirm the reserve program
"
When
Reservation
displays the time to the end of the reserved wash cycle, and
the indicator turns on.
To change the running program or cancel the reservation,
you should cut off the supply and reselect.
6 Press the "start/pause" button
5 Close the top lid
Except water filling and draining, if the
top cover is opened, the washing
machine will stop running and alarm.
6 Finish washing
The washing machine cuts off the power supply
automatically when wash cycle ends.
Wash
Rinse
(min)
(min)
Rinse twice,each about2
Rinse twice, each abut 2
About 3
Rinse twice, about 2
About 3
Rinse once, about 2
"
becomes active, the nixie tube
Using process
Using process
Spin
(min)
About 6
About6
About 2
About 2
"
The button of Reservation
the washing will finish
about 18 hours later
Total time(min)
About 35~47
About 35~47
About 20
About 11
RESERVE
ATION
"
"
Reservation
"
on page 11.
START
PAUSE
After Finishing wash
alarm automatically
Advertisement
Table of Contents
