Reports & Contacts - JabloCom EYE-02 User Manual

Ꮀ
Detector configuration
Each detector can be configured to 5 sensitivity levels. Higher sensitivity settings mean that detector is activated more
easily, e.g. a smaller movement will be interpreted as activation.
Camera detectors can be configured to respond to their triggering in severral ways. Any of camera detectors can be
set to make alarm always when the detector is triggered or the detector can be set only to wake up the camera for
an adjustable period of time. Then, the following detectors will generate alarm when their sensors are triggered: those
set to make alarm directly and those set to make alarm when camera is woken up. The camera will return into idle
after the WAKE-UP period elapses when no detectors are triggered during this WAKE-UP period.
Detector(s) configured
to Wake-up camera
WATCH mode
(idle)
Create your JabloTool account on www.jablotool.com to configure your detectors remotely.
3.7 Reports & Contacts
The EYE-02 camera can report events to mobile phones (via voice call
addresses or to the JabloTool server (see chapter 4.1 for more information). Up to 10 different phone numbers and 10
e-mail addresses can be saved in the camera. JabloTool Applications further extend camera benefits. The application
Messenger Service enables you to receive SMS, MMS and e-mails directly from JabloTool server with flat data tarrif.
Security agency
JabloTool
Messenger
service
http://jablo...
EYE-02.ENG.MAN.User_Manual.21
Wake-up time has passed
Detector working always
Wake-up mechanism
+555123456
From:
+555123456
---------
X i m u r a c e r u m
terunterem co
in tuitatus is?
http://jablo
Detector(s) that works
Wake-up
Return to idle
, text message
e-mail
From:
+555123456
- 9 -
only in Wake-up
ALARM
, MMS ) e-mail
+555123456
From: eye-02@...
To: Mr.James
Subject: Alarm
---------------------
Attachments: Video.avi
Ximuracerum terunterem co in
tuitatus is? terunterem co in
tuitatus is?
EN