Reports - JabloCom EYE-02 User Manual

 CARE
Profile CARE has been especially designed for monitoring small
children and elderly or disabled people.
The camera used in CARE profile allows
the user to leave their home, stay in a short
distance away from the home and watch
their sleeping baby or ill grandmother etc.
at the same time.The camera is activated
by movement or by a PANIC alarm
(triggered by a personal wrist button)
The internal acoustic camera signals are disabled in the CARE profile. Also TILT detector is
blocked to allow the camera manipulation.
 SHOP
The most powerful profile is SHOP. In this mode, all detectors
are active, including the permanent process of "Motion in
Picture" detection. This profile offers the highest quality of
permanent monitoring; consequently it is the highest energy
consumption profile.
This profile perfectly fits places requiring the whole day moni-
toring and full protection during the night time, such as shops,
office corridors and reception areas, etc.

3.6 Reports

The EYE-02 camera can report events to mobile phones (via voice call
or to e-mail addresses. Up to 10 different phone numbers and 10 e-mail addresses can be saved to the
camera list.
By the default settings camera sends an MMS and makes a call to all enrolled contacts in case of an
alarm.
To set the contacts, use the JabloTool software, Contacts menu (see chapter 4).
Each stored contact can have its own report level set. Three levels (Normal, Extended, All Details) indi-
cate how many events should be reported to the contact. Normal level reported contacts will receive
ALARMS only, Extended and All Details level contacts will receive additional reports for specific events.
JR_EYE-02.ENG.MAN.Manual.12.D - 7 -
, text message , MMS )