Reports & Contacts - JabloCom EYE-02 Manual

 Tilt and vibration detector (TILT)
Built-in tilt and vibration detector can detect a tampering or an unwanted manipulation of the camera.
Example: Stealing the camera body or changing camera position.
As vibration detectors are very sensitive, it should not be use for outdoor installation to prevent
the false alarms caused by the wind gusts. The vibration detector sensitivity reduction may be
necessary also for indoor installation with usual vibrations in some cases.
The detectors are optimized for application in rooms with a maximum distance up-to 10 meters.
 Detector configuration
Each detector can be configured to 3 sensitivity levels and 3 levels of analysis.
Higher sensitivity settings mean that detector si activated more easily.
Example: Smaller movement or smaller vibration will be interpreted as activation.
Higher analysis level means that for activation more analysis has to be made before it is rated as activation.
Example: The movement or sound have to last longer or object (person) has to cross more detection zones etc..
3.6 Reports & Contacts
The EYE-02 camera can report events to mobile phones (via voice call
e-mail addresses. Up to 10 different phone numbers and 10 e-mail addresses can be saved to the camera list.
 Report levels
Each stored contact can have its own report level set. Three levels (Normal, Extended, All Details) indicate
how many events are reported to the contact. Normal level reported contacts will receive ALARMS only,
Extended will get also some troubleshooting information (power failure, flat battery...) and All Details level
contacts will receive all additional events (mode changes, startup/shut down...)
By default settings, camera sends alarm report as MMS and makes a call to all enrolled contacts. All other
reports come as SMS to the user.
The extended level of reporting is assigned only to the first enrolled contact, all additional contacts get
normal level.
 Editing contacts
To add a new contact by calling, you can call the EYE-02 camera directly from a new phone number while the
camera is in the ENROLL mode.
New contacts may also be added via an SMS command (see chapter 4.2, CONFIG commands).
The most comfortable way of editing contacts is JabloTool software. You may simply edit the numbers or
e-mail adresses and completely customise what events will be reported at which reporting level.
JR_EYE-02.ENG.MAN.Manual.16.A
Jablotool DESKTOP - contacts configuration
- 7 -
, text message , MMS ) or to