JabloCom EYE-02 Application Note

Wireless peripherals, gsm security camera
Hide thumbs Also See for EYE-02:

Advertisement

Quick Links

 
Wireless peripherals
 
 
 
 
 
 
 
 
 
 
 
 
EYE-02.ENG.MAN.APN.Wireless_peripherals.01.docx
 
EYE-02 GSM Security Camera
Application note
 
 
 
 
- 1 -
 
 

Advertisement

Table of Contents
loading

Summary of Contents for JabloCom EYE-02

  • Page 1             Wireless peripherals EYE-02 GSM Security Camera Application note                         EYE-02.ENG.MAN.APN.Wireless_peripherals.01.docx - 1 -    ...
  • Page 2: Table Of Contents

      9.5.2 Enrolling JA-80A ......................................13     Enrolling thermostats and camera into wireless switches ..............13     9.6.1 Enrolling thermostats into EYE-02 camera............................13     9.6.2 Enrolling thermostats and camera into wireless socket AC-88......................13 EYE-02.ENG.MAN.APN.Wireless_peripherals.01.docx - 2 -    ...
  • Page 3: Introduction

    When the peripherals are used with camera EYE-02, the camera plays the role of the control panel. Camera EYE-02 is equipped with 7 internal detectors and 2 virtual switches. Wireless peripherals further expand camera capabilities.
  • Page 4: Detectors

      JA-81M Picture 2: EYE-02 camera used with Magnetic door (window) opening detector JA-80M You can connect by wires additional detector to the JA-81M. You can use any detector which connects or disconnects contact after its activation. Camera will record video and inform the user also after this additional detector is activated.
  • Page 5: Passive Infrared (Pir) Detectors

    Example of use at home: Optical barrier is placed along swimming pool on the garden. If a small child crosses the barrier, the camera will inform the parents about this by call and SMS. JA-80IR Picture 3: Example of using camera with Fire detector, Flood detector and Door opening detector. EYE-02.ENG.MAN.APN.Wireless_peripherals.01.docx - 5 -    ...
  • Page 6: Wireless Switches

    Wireless Switches Camera EYE-02 is equipped with two virtual switches. These switches work as wirelessly sent commands to wireless switches to connect or disconnect their contact. Wireless socket AC-88 It is switch made as do-it-yourself solution. You can remotely turn ON and OFF all domestic appliances, lighting, heating, watering, etc.
  • Page 7 Example of SMS command: "<Remote Access Password> DeviceX ON 02:00:00" will switch the DeviceX ON for 2 hours. Switches are called Devices in SMS commands. For more information on SMS commands see the camera manual. EYE-02.ENG.MAN.APN.Wireless_peripherals.01.docx - 7 -  ...
  • Page 8: Wireless Buttons

      RC-80 Help! button RC-87 Pushing the button causes Panic alarm even if EYE-02 is in SLEEP mode.   Example of use: Elderly people who may be in emergency due to sudden drop in their health condition RC-87 simply press the panic button and the camera will report the Panic alarm via SMS, MMS, call, email or JabloTool server and contact parents, neighbours or hospital for help.
  • Page 9: Sirens

    60°C (event Fire Alarm is generated in the camera) • More thermostats can be enrolled into one wireless switch. Heating is then turned ON if at least one thermostat requires this. EYE-02.ENG.MAN.APN.Wireless_peripherals.01.docx - 9 -    ...
  • Page 10: Jablotool Applications

        Picture 6: Scheme on how EYE-02 works with wireless relay and thermostat JabloTool Applications JabloTool is camera management interface. In JabloTool you connect to your camera to see live picture from the camera, events in the history or to configure and control your camera.
  • Page 11: Enrolling Peripherals

    Other possibilities of switching camera to Enroll mode are described in the chapter 9.1. Insert battery into your detector: JA-80D, JA-80IR, JA-80M, JA-80P, JA-80PB, JA-80S, JA-80W, • JA-81M, JA-82M, JA-82SH, JA-85B, JA-85P, JA-86P, JA-88P or plug the detector into the mains if you have detector JA-80G. • EYE-02.ENG.MAN.APN.Wireless_peripherals.01.docx - 11 -    ...
  • Page 12: Enrolling Wireless Switches

    (this is indicated by red LED No. 2 or 4 flashing) by pressing its button X or Y. Send the enrollment signal from the camera Go to JabloTool via internet, tab Peripherals and click on Add new device. Other options are described in the chapter • 9.3.1, step 4. EYE-02.ENG.MAN.APN.Wireless_peripherals.01.docx - 12 -    ...
  • Page 13: Enrolling Wireless Buttons

    Enroll the camera into the controlled wireless switch (it is described in the chapter 9.3.2/9.3.3, steps 2 and 3). 9.6.1 Enrolling thermostats into EYE-02 camera Switch the camera into Enroll mode (it is described in chapter 9.1) Insert battery into the thermostat TP-82 or TP-83 9.6.2...

Table of Contents