Table of Contents
Advertisement
wish to use UPnP, you can disable it.
Enable/Disable UPnP: Select to enable or disable this function.
6.3.8
VPN Passthrough Setting
Virtual Private Networking (VPN) is typically used for work-related networking. For VPN
tunnels, the router supports IPSec, Pass-through, PPTP Pass-through, and L2TP
Pass-through.
Item
IPSec Pass-through
PPTP Pass-through
L2TP Pass-through
http://www.sapido.com.tw/
Description
Internet Protocol Security (IPSec) is a suite of protocols used to
implement secure exchange of packets at the IP layer. To allow
IPSec tunnels to pass through the router, IPSec Pass-through is
enabled by default. To disable IPSec Pass-through , select Disable
Point-to-Point Tunneling Protocol is the method used to enable
VPN sessions to a Windows NT 4.0 or 2000 server. To allow PPTP
tunnels to pass through the router, PPTP Pass-through is enabled
by default. To disable PPTP Pass-through, select Disable.
To allow the L2TP network traffic to be forwarded to its destination
without the network address translation tasks.
78
User Manual v1.0.0
Advertisement
Table of Contents
