Table of Contents
Advertisement
1.
Make sure you are under "Router Mode".
2.
Connect SAPIDO GR-1142 to xDSL/ Cable modem with the Ethernet cable, WAN to
LAN.
3.
Turn on your Computer.
2.3
Network setup
After the network connection is built, the next step is setup the router with proper network
parameters, so it can work properly in your network environment. Before you connect to the
wireless router and start configuration procedures, your computer must be able to get an IP
address from the wireless router automatically (use dynamic IP address). If it's set to use
http://www.sapido.com.tw/
12
User Manual v1.0.0
Advertisement
Table of Contents
