1.4.1 Power Connector
The power connector is designed to be used with the power adapter included in the
product package.
1.4.2 Network Ports
The Switch is equipped with eight RJ-45 ports that support network speeds of
10/100/1000Mbps.
1.4.3 Cabling
1000Mbps - To transmit at 1000Mbps requires Cat.5 TP cabling that has all Four (4)
twisted-pair wires connected in RJ45 connector.
100Mbps - To transmit at 100Mbps requires Cat. 5 cabling.
10Mbps - When transmitting at 10Mbps, Cat. 3, 4 or 5 TP cabling with RJ-45 sockets
can be used.
Port Type
1000BASE-T
100BASE-TX
10BASE-T
Note: Cat. 5 TP cable recommended whenever installing new cabling.
1.4.4
QoS/VLAN mode switch
The Switch button can setup two mode of QoS function. You must restart the power
when setting the switch button.
1.4.4.1 QoS
Normal model
Port 8 ->
Port 7 ->
Port 6 ->
Port 5 ->
Port 4 ->
Port 3 ->
Port 2 ->
Port 1 ->
Auto control mode
Group1
Port 8 ->
Port 7 ->
Port 6 ->
Cable Type
Cat.5 TP
Cat.5 TP
Cat. 3, 4 or 5 TP
Normal Priority ( Red )
Normal Priority ( Red )
Normal Priority ( Green )
Normal Priority ( Green )
Normal Priority ( Red )
Normal Priority ( Red)
Normal Priority ( Green )
Normal Priority ( Green )
High Priority ( Red )
High Priority ( Red )
Normal Priority ( Green )
5
Connector
RJ-45
RJ-45
RJ-45