Furniture Or Projector Mounting - Extron electronics VersaTools MDA 3 Series User Manual

VersaTools™ MDA 3 Series, cont'd
1. If feet were previously installed on the bottom of the
MDA, remove them.
DI ST
RI BU
VersaTools Rack Shelf
1/4 Rack Width False Front
Face Plate
Use 2 mounting holes on
opposite corners
Figure 1 — Rack mounting the MDAs on a
VersaTools rack shelf
DI
ST
RI
BU TI O
N AM
PL
IF IE
R
Figure 2 — MDAs mounted on a standard rack
shelf
2. Mount the MDA on the rack shelf, using two 4-40 x 3/16"
screws in opposite (diagonal) corners to secure the MDA
to the shelf.
3. Install blank panel(s) or other unit(s) to the rack shelf.
2 VersaTools™ MDA 3 Series • Installation
TI O
N
AM
PL
IF IE
R
DI ST
RI BU
TI O
N AM
PL
IF IE
R
DI
ST
RI BU
TI O
N
AM
PL
IF IE
R
(2) 4-40 x 3/16" Screws
DI ST
RI
BU
TI O
N
AM
PL IF IE
R
DI
ST RI
BU
TI O
N
AM
PL
IF IE
R
M D
DI ST A
S E
RI BU R IE
TIO
N AM S
PL
IFI ER
Only products in the VersaTools line can be mounted to a
VersaTools shelf. Any 1U rack-mountable Extron
product can be mounted on the standard shelf.

Furniture or projector mounting

Furniture mount or projector mount the MDA using the
optional mounting kit (part #70-212-01, furniture; or 70-217-01,
projector) as follows:
1. Attach the mounting brackets to the MDA with the
machine screws provided (figure 3).
D IS
T R
IB U
Digital Projector
T IO
N
A M
P L
IF IE
R
Under Desk Mounting
Figure 3 — Desk and projector mounting the MDAs
2. If feet were previously installed on the bottom of the
MDA, remove them.
3. For furniture mounting, hold the MDA with the attached
brackets against the underside of the table or other
furniture. Mark the location of the screw holes of the
bracket on the mounting surface.
4. For furniture mounting, drill 3/32" (2 mm) diameter pilot
holes, 1/4" (6.3 mm) deep in the mounting surface at the
marked screw locations.
5. For furniture mounting, insert #8 wood screws into the
four pilot holes. Tighten each screw into the mounting
surface until just less than 1/4" of the screw head
protrudes.
VersaTools™ MDA 3 Series • Installation
Projector
Mounting
Bracket
Mounting
Bolt
Ceiling
Projector Mounting
3