11.1
Using authentication unit (IC card type)
7
Configure "IC Card Type" and "Operation Settings".
% In "IC Card Type", specify the required IC card type.
% For "Operation Settings", specify how to log in to this machine after registration.
Card Authentication: Allows the user to log in by simply placing the IC card.
Card Authentication + Password: Allows the user to log in by placing the IC card and entering the
password.
For details on how to log in to this machine, refer to page 10-19.
8
Press [OK] twice.
9
Press [2 Logoff Settings].
10
Specify whether to log out the user when scanning the original has finished after the user logged in with
the authentication unit.
11
Press [OK].
12
Press [Close] twice.
VL6522c/VL5522c/VL4522c
11
11-5