5.1
Basic
5.1.7
Separate Scan
When the original contains pages exceeding the capacity of the ADF, you can divide the original into several
batches to handle each lot as a single copy job. You can also use the copy function by switching between
the ADF and the original glass for scanning the originals.
0
Do not load original sheets beyond the upper limit for the ADF. It would cause jamming and/or spoiling
of the original or failure of the machine.
0
When making 2-sided or combined copies using the original glass, the machine can scan a number of
original pages without enabling Separate Scan.
1
Load the original.
2
In the Basic tab, press [Separate Scan].
3
Press the [Start] key.
The original is scanned.
4
Load the next batch of the original, and then press the [Start] key.
% To change the scanning settings, press [Change Setting].
5
Repeat Step 4 until all pages of the original are scanned.
6
After all original pages have been scanned, press [Finish].
7
Press the [Start] key.
d
Reference
To set the Separate Scan output method:
Press the [Utility/Counter] key ö [User Settings] ö [Copier Settings] ö [Separate Scan Output Method].
VL6522c/VL5522c/VL4522c
5
5-15