Matrox M9120 User Manual page 27

2
Cause
If you're using multi-display mode, the program window or dialog box may be in a display
or on a monitor that's unusable. (For example, your monitor may not be properly connected
or configured.)
1
Solution
Make sure all the displays and monitors you want to use are usable. For more information,
see other troubleshooting items in this guide.
3
Cause
The software may be using a display you didn't intend to use or the software may be
configured to use more displays than the actual number of monitors you have. (For example,
you may be in DualHead Multi-Display mode but you only have one monitor.)
1
Solution
Disable the display:
Windows 2000/XP –
Right-click your Windows desktop background, then click
1
Select the display you want to disable, then clear the
2
this monitor
3 Click
Windows Vista –
1 Right-click your Windows desktop background, then click
settings
Select the display you want to disable, then clear the
2
monitor
Click
3
4
Cause
The program window or dialog box may be somewhere off-screen.
1
Solution
If the program window you want to see is named on the Windows taskbar, right-click on it
and select
position. To fix this problem, see the other solutions.)
2
Solution
Manually move the program window or dialog box:
1 Press [Alt]+[Space].
2 If you see a pop-up menu, click
Move
Press on one of the arrow keys once and move your mouse pointer to where you want
3
the window or dialog box to appear, then click. The program window or dialog box
should appear where you clicked.
check box.
or for your changes to take effect.
OK Apply
.
check box.
or for your changes to take effect.
OK Apply
. (If you click
Maximize
).
Extend my Windows desktop onto
Extend the desktop onto this
the program window goes back to its previous
Restore
. If you don't see a pop-up menu, press [M] (for
Move
Properties Settings
Personalize Display
Matrox M-Series – User Guide 27
.