Step-by-step connection setup – Quad Display
Connect your quad-monitor
1
cable
Attach your quad-monitor cable to the
connector on the bracket of your Matrox
card. Make sure the connectors are properly
fastened.
Connect your monitors
2
If your monitor has a DVI connector,
connect your monitor cable directly to the
quad-monitor cable.
If your monitor has an HD-15 connector,
use a DVI-to-HD15 adapter included with
your product to connect your monitor cable
to your quad-monitor cable.
Make sure all connectors are properly
fastened.
Note:
connector each is attached to. Numbering starts with the
primary display – the one that first displays information
when you restart your computer. If another graphics card is
installed in your computer, display numbering may be
different
Your Matrox card is now installed. Restart your computer and install your Matrox software
"Software setup", page
14 Matrox M-Series – User Guide
Monitors are numbered consecutively based on which
.
15).
Quad-monitor
cable
Monitor connector (DVI)
Monitor connector
(HD-15)
DVI-to-HD15
adapter
Monitor
connector (DVI)
1
2
3
4
(see