Matrox M9120 User Manual page 12

Connection overview – DualHead
Monitor connector (DVI)
Monitor connector
(HD-15)
Step-by-step connection setup – DualHead
Attach the dual-monitor cable
1
Attach your dual-monitor cable to the
connector on the bracket of your Matrox card.
Make sure the connectors are properly
fastened.
WARNING:
your graphics card, carefully insert the connector on your dual-monitor cable as straight
as possible into the connector on your graphics card. Specifically, inserting the connectors
into each other at an angle is likely to bend and damage the pins on the connector of the
dual-monitor cable.
12 Matrox M-Series – User Guide
DVI-to-HD15
adapter
Monitor connector (DVI)
To avoid damaging the LFH-60 connector on your dual-monitor cable or on
Dual-monitor cable
Dual-monitor cable