Configuring the Transmitter
Chapter 6
Unit time:
Enter the current time here or click the Synchr. PC button to copy the system
time of your computer to the VIP.
Timer server
The VIP can receive a time signal from a time server (NTP server) and use it to
set its internal clock. The device calls up the time signal automatically every two
hours.
Time zone:
Select the time zone that applies to your system.
Time server IP address:
Enter the IP address of the chosen NTP server here.
Camera name
The camera name simplifies identification of the remote camera location, for
example in the event of an alarm call. It will be shown in the video image if this
facility has been configured (see page 39). Moreover, the camera name is used
by VIDOS, VCS software for managing video surveillance systems, and makes it
easier to identify the camera.
38
VIP 10 / VIP 1000