Installing The Unit - VCS VIP 10 User Manual

Installation

Installing the unit

With its ultra-compact dimensions, the VIP is particularly well suited for
installation in cabinets.
Warning!
The unit is intended for use indoors or in a protective enclosure. Select a
suitable location for installation where the equipment is not subject to
extreme temperatures or humidity. The ambient temperature must lie
between 0 and +50 °C. The relative humidity should not exceed 80%.
The unit generates heat during operation. Ensure that there is adequate
ventilation and also that there is enough clearance between the unit and
heat-sensitive objects or equipment.
Make sure the following conditions for installation are complied with:
Do not mount the unit close to heaters or other heat sources. Avoid locations
subject to direct sunlight.
Allow sufficient space for running cables.
Ensure that the unit has adequate ventilation.
Use only the cables supplied for connections or appropriate cables, which are
also shielded against electromagnetic interference.
Position and run all cables so that they are protected from damage, and
provide strain relief where needed.
VIP 10 / VIP 1000
4
17