VCS VIP 10 User Manual page 30

Configuration using a Web Browser
General procedure
The screens for the Installation Wizard will be shown in sequence, allowing you
to work quickly and easily. The upper part of the window always contains
information about the settings options. The current settings are shown in the
lower part of the window. You can change settings by entering the desired value
in a text field or choosing it from a list. The navigation buttons for the Installation
Wizard are at the bottom of the window. You can switch between pages of the
Wizard at any time.
Note
Your screen display may differ slightly from the illustration, depending on
whether you are working with a transmitter or a receiver and a VIP 10 or a
VIP 1000. However, the configuration procedure with the Installation
Wizard is the same for all units.
– First read the information provided.
– Make the desired settings.
– Click Next>> to proceed to the next screen.
or
– Click <<Back to return to the previous screen.
or
– Click Cancel to end the wizard without changing the settings.
30
Chapter 5
VIP 10 / VIP 1000