Table of Contents
Advertisement
THE PROJECTOR DOES NOT TURN ON
Possible Causes
There is no power
NO PICTURE / FILE NOT SUPPORTED
Possible Causes
The video source is not properly
connected or selected
Incorrect file extension / Video is
encoded with incorrect codec
IMAGE IS BLURRED
Possible Causes
The projector is not in focus
Image appears stretched when
connected to an external device
PROJECTOR HAS NO SOUND
Possible Causes
Incorrect volume settings
Troubleshooting
Solution
Check to ensure the power outlet or
battery source is good. Check the
power adapter to ensure a proper
connection with the wall outlet as
well as the projector. Confirm that
the unit is charged and has enough
power.
Solution
Check the video source signal to
ensure that it is properly connected.
Select the correct input source by
choosing the input desired from the
main menu.
Please refer to "Specifications" page
to see which file types and codecs
are supported. Verify that the file
was encoded properly.
Solution
Adjust the focus with the focus
adjustment dial until the image
comes into focus.
Verify the output setting on device
is configured to 4:3 aspect ratio
Solution
Check both volume controls by
playing a file and clicking Vol+ on
the projector and (
27
) on remote
Advertisement
Table of Contents
