Troubleshooting - AAXA Technologies LED PICO + User Manual

Technical Details

Troubleshooting

IMAGE IS BLURRED
Possible Causes
The Projector is not in focus.
The Projector is offset from plane / angle of opera-
tion.
NO SYNC, NO SIGNAL
1. Be sure to setup the computer to enable a video signal output. On some
laptops this is done by pressing and holding Function F5 key. If using the LED
Pico+ as an external monitor on Windows based systems, this can be done by
selecting "extend my desktop to this monitor". The native resolution of the LED
Pico+ projector is 1280x720. Depending on the video driver different resolu-
tions may need to be selected for proper output.
Solution
Adjust the focus with the focus adjustment dial
until the image comes into focus.
Move the projector so that it is both 180 degrees
and on an evern plane with the screen.
38